Details
Sometimes standard zip ties are not enough. The ModMyMods B.D.S.M. (Built for Data & System Management) industrial zip ties are 11" long and rated for 120 lb tensile strength, made to hold thick power supply harnesses, dense custom loop routing and oversized cable bundles firmly in place. They are not the small front panel header kind of tie. The heavy-duty black nylon ties come in a pack of 10.
Properties
- Type
- Industrial zip tie, self-locking
- Length
- 11"
- Tensile strength
- 120 lb
- Material
- Heavy-duty nylon
- Color
- Black
- Pieces in the pack
- 10
Made for
- 24-pin and EPS cable bundles
- High-gauge GPU power runs
- Custom loop pump and radiator harness routing
- Large case cable channels
- Server rack cable control
- Overbuilt PC mods
Built for serious tension
With a 120 lb tensile rating the ties hold heavy bundles that thin cable ties cannot. The self-locking head holds the tie permanently once it is pulled tight, and the 11" length goes around large bundles with room to spare.
Clean black finish
The black nylon blends in with black cables, sleeving and cases for a stealthy look.
Technical data
| Length | 11" |
| Tensile rating | 120 lb |
| Material | Heavy-duty nylon |
| Lock type | Self-locking |
| Color | Black |
| Pieces in the pack | 10 |
Notes
- The self-locking head holds permanently; cut the tie to remove it.
- For lighter cable management, the ModMyMods 4" and 11" cable ties (MOD-0165, MOD-0166) come in packs of 10.
In the box
- 10x 11" industrial zip tie, black
