Details
The MMM 5-Pin SATA "Push In" End Cover - Black is the cover for the ModMyMods 5-pin SATA "Push In" female connector. It closes the back of the connector and ends the cable there with a 90° termination, so this is the cover for the last connector on a cable or for a single-drive cable.
Properties
- Type
- SATA push-in end cover
- Function
- ends the cable at the connector with a 90° termination
- Fits
- MOD-0248 MMM 5-Pin SATA "Push In" Female Connector
- Color
- Black
- Pieces in the pack
- 1
Holds the wires in place
After you press the stripped wires into the slots of the push-in connector, snap the cover onto the back. It holds the wires down in their slots and gives the connector a clean, closed back.
Two covers for one connector
- End Cover (MOD-0249): ends the cable at this connector with a 90° termination.
- Pass-Through Cover (MOD-0250): lets the wires continue to the next SATA connector on the same cable.
Technical data
| Article | MOD-0249 |
| Type | SATA push-in end cover |
| Function | ends the cable at the connector with a 90° termination |
| For | MOD-0248 SATA "Push In" Female Connector |
| Color | Black |
Notes
- This cover needs the MOD-0248 MMM 5-Pin SATA "Push In" Female Connector to work. The connector is sold separately.
- The MOD-0250 Pass-Through Cover is the other cover for the same connector; it lets the wires continue to the next connector.
In the box
- 1x MMM 5-Pin SATA "Push In" End Cover - Black
