ModMyMods 4-Pin PWM Female Connector - Black (MOD-0112)

The ModMyMods 4-pin PWM female connector is a black, empty connector housing for building your own PWM fan and pump cables, or for giving an existing cable a fresh black connector. Fit it with fan female pins (ModMyMods Fan Female Pin - 3 Pack, MOD-0119) and make the cable exactly the way you want it: your length, your wire, your sleeving.

Properties

Type

Connector housing, female

Connector

4-pin PWM fan

Positions

4

Pins used

fan female pins (ModMyMods Fan Female Pin - 3 Pack, MOD-0119)

Color

Black

Pieces in the pack

1

Where it goes

This 4-pin housing is the connector used at the end of PWM fan and pump cables; it plugs onto a 4-pin fan header. It mates with the ModMyMods 4-Pin PWM Male Connector (MOD-0111) and plugs onto fan headers.

Replace tired connectors

Use the housing to replace beige, white or faded connectors on an existing cable set with a clean black one, or to finish new custom-length cables and extensions. ModMyMods carries replacement connectors and pins for the standard internal power supply, fan and SATA cables, sold one by one so you only buy what you need.

Fits 3-pin headers too

This 4-pin fan connector also fits 3-pin fan headers, which makes it more versatile than a standard 4-pin connector.

Pins for this connector

The housing comes empty. Crimp fan female pins (ModMyMods Fan Female Pin - 3 Pack, MOD-0119) onto your wires, then push each pin into its cavity from the back of the housing.

Technical data

Notes

• Pins are sold separately: fan female pins (ModMyMods Fan Female Pin - 3 Pack, MOD-0119).
• Check the type and gender of the connector you are replacing before you order, so the new housing matches it.
• To take a pin back out of the housing, use a pin extractor such as the ModMyMods Fan / JST / SL Pin Extractor Tool (MOD-0319).

In the box

• 1x ModMyMods 4-Pin PWM Female Connector - Black