Details
These isopropyl alcohol pads remove old or unwanted thermal compound from surfaces safely and easily. Each pad is pre-soaked in 70% isopropyl alcohol and sealed in its own sachet, so you need no water or other cleaning agents to remove thermal compound. They are safe to use on mainboard chips, CPUs, GPUs and waterblocks.
Properties
- Type
- Pre-soaked cleaning pad, single use
- Soaked in
- 70% isopropyl alcohol
- Packing
- Individually sealed sachet
- Use
- Removing thermal compound
- Pieces in the pack
- 1
Remove old thermal paste
Before you remount a cooler or waterblock, the old paste has to come off both surfaces completely. Wipe the bulk of it away, then clean the chip and the cooler base with the pad until no paste is left in the corners or on the edges of the chip.
Ready to use
The pad comes pre-soaked in 70% isopropyl alcohol. Tear the sachet open and start cleaning: no bottle, no water and no other cleaning agent is needed. Each pad can be unfolded to give a larger surface area.
Safe on your parts
The pads are safe to use on mainboard chips, CPUs, GPUs and waterblocks. Isopropyl alcohol dissolves the oil in thermal paste and evaporates quickly.
Technical data
| Part number | IAP-70 |
| Type | Pre-soaked alcohol pad |
| Liquid | 70% isopropyl alcohol |
| Packing | Individually sealed sachet |
| Use | Single use |
Notes
- These pads are good for one application and are not washable or reusable.
- Warning: do not ingest these pads before or after use, as they can be hazardous to your health.
- Isopropyl alcohol is flammable. Let the cleaned parts dry fully before you apply new paste and power the system on.
In the box
- 1x Isopropyl Alcohol Pad Thermal Paste Remover
