13mm SATA Data Cable Heatshrink Tubing (1/2")
1/2" (13mm) heatshrink, sized for a sleeved SATA data cable. The heatshrink is what finishes the end of a sleeve run so it does not fray back off the cable, and it hides the transition into the connector.
All ModMyMods 3:1 heatshrink, in black, blue, red and white. 3:1 is the shrink ratio: it goes down to a third of its starting diameter, which is what lets one size cover both the sleeved section and the narrower connector body without a step.
Use a heat gun on low rather than a lighter. A flame scorches the sleeve underneath and the mark does not come off.
SATA sleeving to go under it is in SATA data cable sleeving.
