Barrow Multi-Link Coupler Adapter - 12mm OD Rigid Tube - Silver (TYDJ12-V1-Silver)

The Barrow TYDJ12-V1 is a straight coupler that joins two pieces of 12mm OD hard tube end to end. Each tube slides into one side and is sealed by two O-rings, so you can extend a run or split it into two parts without a threaded fitting. The body is knurled brass, finished in shiny silver.

Properties

Type

Hard tube coupler, tube to tube

Tube size

12mm OD hard tube

Seal

2 silicone O-rings on each side

Material

Brass

Color

Silver

Pieces in the pack

1

Join two straight runs

A coupler joins two pieces of 12mm OD hard tube end to end without a bend or a fitting in a port. Use it when one tube is not long enough for a straight run, or to split a long run so the tubes are easier to fit and remove.

Two O-rings on each side

Barrow seals each tube with two silicone O-rings on each side of the coupler. Push each tube in until it seats; the O-rings grip the outside of the tube and keep the joint tight.

Knurled brass body

The body is a short brass sleeve with a fine diamond knurl all around it, which gives a sure grip when you push the tubes in or pull them out, and matches the knurled look of Barrow hard tube fittings.

Technical data

Notes

• This coupler fits 12mm OD hard tube only. It does not hold soft tubing or hard tube of other sizes.
• Barrow made this coupler in black, white, shiny silver and gold. This listing is the shiny silver version.
• Barrow notes that it may update the look or construction of the part without notice; the part you receive is the current version.

In the box

• 1x Barrow Multi-Link Coupler Adapter - 12mm OD Rigid Tube - Silver