Barrow LRC2.0 Version RGB LED Strip for Graphics Water Block - 15 LED (RGB-LRC03)

The Barrow RGB-LRC03 is a 15 LED addressable lighting strip for Barrow graphics card water blocks. It runs on 5V, is part of Barrow's LRC 2.0 (Aurora) lighting system and plugs in with a 2510 3-pin connector on a 400 mm cable.

Properties

Type

Addressable LED strip for Barrow GPU water blocks

LEDs

15

Voltage

DC 5V

Connector

2510 3-pin, male (5V, data, ground)

Cable length

400 mm

Lighting system

Barrow LRC 2.0 (Aurora)

Pieces in the pack

1

Light for a Barrow GPU block

Barrow makes this strip for changing the light module of its graphics card water blocks. Barrow says the 15 LED RGB-LRC03 and its 9 LED strip RGB-QV02 are interchangeable on Barrow GPU blocks, so you can upgrade a block to the longer strip or replace a strip that has failed.

Every LED on its own

Each LED has its own control IC. Unlike a standard RGB strip where all LEDs show the same color, Barrow says every LED can change color on its own, for effects such as rainbow, clockwise and counterclockwise racing, color change and horse racing.

Plug-in connector

The strip is a removable module that connects with a plug, which Barrow says is more convenient and safer. The 3-pin plug carries 5V, data (DIN) and ground.

Barrow LRC 2.0 control

The strip needs a Barrow LRC 2.0 controller, sold separately. Barrow names its ARSKZQ, DK201 and DK301-16 controllers; see also the Barrow inline RGB LED controller. Barrow says the lighting can sync with the motherboard through an extension cable for Barrow LRC 2.0 RGB on the motherboard.

Technical data

Notes

• The plug is a 2510 3-pin type for Barrow LRC 2.0 parts, not a standard motherboard ARGB plug. Plan for an LRC 2.0 controller or Barrow's extension cable.
• Barrow notes that it may update the look or construction of the product without notice; the product you receive is the current version.

In the box

• 1x Barrow LRC2.0 Version RGB LED Strip for Graphics Water Block - 15 LED