Details
The Aquacomputer Poweradjust Connection Cable for Laing D5 and DDC Pumps is an adapter cable. It connects a Laing D5 or DDC pump with a 4 pin power supply plug to a suitable 3 pin fan header. Its typical use is the power output of the poweradjust USB or a powerbooster-optimized aquaero.
Properties
- For
- Laing D5 or DDC pump, or any other device with 4 pin plug
- Connection
- 4 pin power supply plug to 3 pin fan header
- Pieces
- 1
What you need to connect it
The adapter sits between the pump's 4 pin plug and a 3 pin header that can carry the pump, such as the power output of a poweradjust 3 USB or an aquaero 6. Aquacomputer's caution: the fan header must be designed to provide enough power for the device on the cable. Pumps for it are in our D5 pumps and DDC pumps sections.
Compatibility
Aquacomputer lists the cable as suitable for these controllers:
- aquaero 6 XT / PRO / LT
- aquaero 5 XT / PRO / LT (with additional heat sink)
- poweradjust 3 USB
- poweradjust 2 USB
- aquaero 4 with powerbooster
- poweradjust USB
