Alphacool Ice Thermal Pad - 11W/mK 120x20x0.5mm - 2 Pieces (12454)

The Alphacool Ice Thermal Pad - 11W/mK 120x20x0.5mm - 2 Pieces is a thermal pad rated at 11 W/mK, two 120 x 20 mm strips, 0.5 mm thick.

Properties

Thermal conductivity

11 W/mK

Size

120 x 20 mm

Thickness

0.5 mm

Pieces in the pack

2

What it is

Alphacool calls this its ultimate solution to cool your computer with a layer of ice. Not frozen water but, in its words, a sensational new thermal pad. The "Alphacool Ice" offers all the benefits and features of a typical thermal pad: self-adhesive, elastic, adaptable, and more!

Where it goes

It can be used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers. Practically all hardware components can now be covered easily and cleanly with ice, as Alphacool puts it. Wherever board meets heatsink, the maker says you are well advised with the Alphacool Ice.

The range

Alphacool says that with up to 17 W / mk the pads surpass all previously-seen thermal pads and pastes. That figure belongs to the top power level: the pads are available in different power levels, 11, 14 and 17W / mk. Each is available in 0.5mm, 1mm and 1.5mm thickness, to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). Other pads of this thickness are in our 0.5mm thermal pads section.

Cutting to size

These can be easily cut with scissors to separate the right size for each component, so each one can be individually configured.

In the box

• 2x Ice thermal pad, 11 W/mK, 120 x 20 x 0.5 mm