Alphacool Eisbaer - Refill Kit (11687)

The Alphacool Eisbaer - Refill Kit is a four-part kit for refilling an Eisbaer All-in-One (AIO) cooler. It holds a funnel with a G1/4 screw thread, an ATX jumper plug, a SATA to 3-pin pump connector and a syringe with thermal paste.

Properties

For

Alphacool Eisbaer AIO

Funnel thread

G1/4, pre-assembled

Pump power

SATA to 3-pin connector

Pieces in the kit

4

Customize your AIO

Alphacool's pitch for the new kit: customize your Eisbaer and turn it into YOUR All-in-One. The idea is to personalize the All in One so that it suits the rest of your system. Fill it as you wish and vary the liquids, or change the fluid to one that matches your color scheme. The funnel's G1/4 thread comes pre-assembled, and thanks to it Alphacool says clean working is guaranteed.

Start the power supply safely

For extra safety while you work, Alphacool has included the ATX jumper plug. This means you can start your power supply without a motherboard and without powering anything else important in your system. The pump will no longer be connected to the rest of the system, but is instead powered via SATA with the included SATA to 3-pin pump connector.

Heat conducting paste

The syringe holds Alphacool's High End thermal paste. Alphacool says that with it you always achieve the best cooling results. The paste ensures clean contact between the CPU or GPU and the cooler and, in Alphacool's words, optimizes your cooler for full performance.

In the box

• 1x ATX jumper plug
• 1x funnel with G1/4 screw thread
• 1x SATA to 3-pin pump connector
• 1x syringe with thermal paste