Details
The Alphacool Core Push Mounting 25mm M3/M4/UNC 6-32 Set 4x is a mounting kit for an Alphacool Distro Plate: four metal pins with four matching sockets, 25 mm in total height. It holds the plate on a radiator or in a PC case, and the box carries M3, M4 and UNC 6-32 screws for mounting.
Properties
- For
- Alphacool Distro Plate, on a radiator or in a PC case
- Total height
- 25 mm
- Diameter metal pins
- 11 mm
- Weight per metal pin
- 10 g
- Color
- black/silver
- Pieces in the pack
- 4 pins, 4 sockets
How the Core Push Mounting System works
Alphacool says the kit offers an easy and secure way to mount the plate. The metal pins are screwed to the Distro Plate, and the matching sockets are attached to the radiator or the PC case. As the next mounting step you plug the plate onto the pins, without the need for tools. According to Alphacool the system enables a tight and stable fit.
What the mounting needs
The kit is the hardware only: the plate comes from our distribution plate reservoir section. Three screw types, four of each, are included for mounting: M3x6, M4x6 and UNC 6-32 x 6. The 25 mm in the name is the total height from the technical data.
In the box
- 1x Core Push Mounting 25mm M3/M4/UNC 6-32 Set 4x
- 4x metal pin
- 4x sockets
- 4x washer
- 4x nut
- 4x M3x6 screw
- 4x M4x6 screw
- 4x UNC 6-32 x 6 screw
Alphacool's data sheet for this kit is a PDF.
