Welcome!

Shopping cart
0

4-Pin Molex to 3-Pin Fan Adapter Cable (CAB177)

Availability: Out of stock

Sku: MOD-0084

$1.99

Quick Overview

Adapter cable from a 4-pin Molex fan plug to a 3-pin fan connector, to run a Molex fan from a motherboard or controller fan header.

Details

This short adapter cable connects a fan with a 4-pin Molex power plug to a 3-pin fan header of the motherboard or a fan controller. The 4-pin Molex connector takes the plug of the fan, and the 3-pin fan connector goes onto the header, so the fan is powered and switched with the PC through the board instead of directly from the power supply.

Properties

Type
Fan adapter cable
Fan end
4-pin Molex
Header end
3-pin fan connector
Wires
2, black
Pieces in the pack
1

Molex fans on a fan header

Some fans, especially older or high power models, come with a 4-pin Molex plug. This adapter lets you run such a fan from a 3-pin fan header instead.

Two wires

The adapter carries the power and ground lines only. The fan gets its power from the header, but it has no speed signal wire, so the board cannot read the speed of the fan.

Technical data

Part number CAB177
Type code 4P-3F
Connectors 4-pin Molex | 3-pin fan connector
Wires 2, black

Notes

  • Check that the fan header can supply the current the fan draws; high power fans may need more than a header gives.

In the box

  • 1x 4-Pin Molex to 3-Pin Fan Adapter Cable
My Cart

You have no items in your shopping cart.