Highly precise In-line temperature sensor for almost all G1/4" threads. The sensor can be integrated at any point in the cooling loop. At the measuring point the wall thickness of the casing is reduced to <1mm and the sensor is insulated from the outside to allow maximum precision and quick reaction of the measurement.  The sensor can be used universally with the monitoring devices sold in our shop. High-Flow: Due to its inner diameter of 1cm this sensor adds no restriction compared to fittings and small to medium sized tubing. Therefore this sensor is truly ''high-flow capable  ''

The new temperature sensor from Phobya with g1/4" inner thread and G1/4" outer thread respectively. With its compact design this sensor can be integrated into the cooling loop at virtually any suitable thread. Its timeless design makes it blend right into the system, especially as it's low height of only 11,6mm (without threads) allows it to fit below almost any connector. The sensor cable is equipped with a standard 2-Pin plug. High-Flow, no narrowing of the cooling channel inside of the sensor! Also see example of installation. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. Technical specifications:   Connection threads: G1/4" Main body: Nickel plated brass Cover: Delrin Diameter: 23,9mm Height with thread: 19,7mm Thread length: 11mm Cable length: 50cm Compatible with: Sensor Inputs of many Mainboards aquaero 3.07, aquaero 4.00 aquastream XT Ultra aquaduct-Varianten mit externem Sensor-Eingang (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer 

This sleek, compact temperature sensor from Phobya with G1/4" inner thread and G1/4" outer thread connections can be integrated into the cooling loop at virtually any suitable thread.