Details
The DimasTech XMV-Cool Waterblock had been developed to fix the Heating Issues of the FPGA Board VCU1525, made by Xilinx.
This high end full coverage FPGA water block has been designed and manufactured in Germany. With German engineering in mind this block was designed for maximum heat dissipation which will allow you to draw more power from the card without risk of damaging components on the board and increase its lifespan.
The full coverage water block cold plate which comes in contact with the FPGA chip (VU9P) and the VRM/Inductors area is made of copper, while the waterblock cover is made of stainless steel, therefor absolutely no aluminum material is introduced into the cooling loop. This assures that no unwanted chemical reactions occur between the copper and aluminum in the loop.
This VCU block has 2x G1/4 thread that is compatible with most PC water cooling components.
The VCU1525 comes in 2 different version, passive and active, our waterblock is compatible with the both version.
The backplate is included in the kit and it's made of Aluminum assuring a perfect match and contact of all the VCU1525 surfaces.
Dimensions:
- Waterblock 205mm x 75mm x 28mm
- Backplate 233mm x 98mm x 5mm
Material:
- Waterblock Copper and Stainless Steel
- Backplate Aluminum
Technical Specifications:
- CNC Laser Cutting/Milling
- Manufactured in Germany
- FPGA Board Compatibility
Tools and Hardware Needed:
- Philips Screwdriver
- Isopropyl alcohol
- Thermal grease for FPGA Chip, all other surfaces use pre-installed thermal pads
Compatible Xilinx FPGA Boards:
- Part Number: DK-U1-VCU1525-A-G Xilinx Virtex UltraScale+ FPGA VCU1525 Acceleration Development Kit
- Part Number: DK-U1-VCU1525-P-G Xilinx Virtex UltraScale+ FPGA VCU1525 Acceleration Development Kit (Passive)
ATTENTION: Description of product on Update/compatibility list on Update
Please Note: Installing this waterblock will void the factory warranty.
THIS PRODUCT PAGE is of PRE-ORDER of the Dimastech® XMV-Cool Waterblock for FPGA Board Xilinx VCU1525 and included parts of the KIT, the expected delivery date for the first batch will be 3rd/4th week December, any further delay will be advertised on the product page and on the news section/social channels
Additional Information
| Manufacturer | Dimastech |
|---|---|
| Compatibility | Part Number: DK-U1-VCU1525-A-G Xilinx Virtex UltraScale+ FPGA VCU1525 Acceleration Development Kit Part Number: DK-U1-VCU1525-P-G Xilinx Virtex UltraScale+ FPGA VCU1525 Acceleration Development Kit (Passive) |
| Number of Ports | 2x G1/4 |
| Cooling Plate Material | Copper |
| Top Cover Material | Stainless Steel |
| Color | Copper |
| Included | 1 x Dimastech® XMV-Cool Waterblock for FPGA Board Xilinx VCU1525 1 x backplate for Dimastech® XMV-Cool Waterblock for FPGA Board Xilinx VCU1525 All necessary screws |
| Material | Copper |
