A new Benchmark in the field of active HDD cooling and insulation is set by the Rev. 2.0 of the successful SILENTstar HDD watercooler series. The SILENTstar HD-Dual Rev2.0 cools and muffles four SATA-HDDs in a so far unique way.
The cooling blocks are made from solid copper, paired with covers made from black POM. The cooling performance is thanks to this mixed design at its best. In combination with the high-grade plastic outstanding decoupling of the hard drives is achieved. Stainless steel pipes connect the cooling blocks. All channels in the cooler were machined widely to allow the best possible flow rates, the connectors are G1/4"
A highlight of the new version is the possibility to additionally cool the HDD's electronics. An optionally available SILENTstar bottom plate can also be mounted.
The stainless steel casing of the cooler is closed and additionally has a two-layer insulation integrated. The insulation is composed of high density foamed plastics an a heavy bitumen layer. This combination ensures that both vibrations as well as high-frequency noise by the HDD is absorbed.
Installation is as easy as it could be: The cooler is shipped pre-installed, only the HDDs need to be screwed in. The box is mounted with M3 screws in the case but it can also be mounted with a slide system.
Installation requires three free 5,25" bays.
|Compatibility||Up to 4x 3.5" SATA HDD's|
|Cooling Plate Material||Copper|
|Top Cover Material||Acetal|
|Number of Ports||2x G1/4|
|Included||1x Watercool Silentstar HD-Quad Rev.2|