This illuminated thermometer can measure the temperature at any location inside or outside the PC.

With this thermometer you will always have an eye on your temperature. The temperature probe can be placed in various locations such as the graphics card, hard drive bays, CPU, PSU or simply inside case.

Sensor Codes:

If you do not see a temperature on your display, refer to the error codes below.

• L ° C     =  No connection to the sensor. Check the sensor cable coming from the display. 
• H ° C    =  Reversed Voltage / Short Circut. Connection of the display cable to the sensor failed at both poles.
• -xx ° C  =  Incorrect Polarity. Cable from the display to sensor attaches the other way around.

Please Note:

The temperature probe is permanently integrated into the display, it cannot be removed or replaced.