The aquaduct 360 eco mark II is the combination of high quality components with excellent performance at an affordable price. Main objectives of the development were an impressive design and a cooling capacity that sets standards for a very good price-performance ratio. All this was achieved with the aquaduct eco series. It is very easy to handle, secure and extremely compact.
Eponymous element is a kind of bridge over which the water runs and then falls down on the other side. The aquaduct is a combination of passive and active radiator, which combine the advantages of both technologies in one product. To make the aquaduct as easy to maintain as possible, large water tanks were integrated into the cooling profiles. This results in minimized necessity of the water on the annual maintenance.
The aquaduct 360 eco mark II includes a microprocessor controlled 12 V pump, a radiator and a triple-tuned to the specific requirements of the external water cooling control electronics. The free aquasuite 2012 Software provides intuitive configuration and monitoring of the aquaduct.
Compared to eco + series of functions of the electronics in the eco-series, however, limited: There are no output temperatures and the fan can be controlled manually. The adjustment is made via USB from the aquasuite. A regulation on water temperature e.g. is not possible.
For installation in a PC PCI (e) slot bracket is included. About this is the aquaduct power. To supply the circuit board a free power connector of the PC power supply is needed.
A tachometer output signal with artificially generated speed signal, it also allows for example to realize the BIOS of the motherboard an emergency shutdown of the PC.
In addition, two cutouts allow the slot bracket to easily carry out the plug & cool-water tubes inside the housing.
In the case of an alarm (user configurable) can be issued a warning tone from the instrument. In addition, the PC can be disconnected via the tachometer signal. The alarm evaluation is extensive and also includes a temperature and fan monitoring.
|Pump type||Integrated Pump|
|Included||Aquaduct 360 eco mark II external water cooling (fully assembled) </br>
Two connections plug & cool straight (mounted on the unit) </br>
PCIe slot bracket with board </br>
Connection cable aquaduct to slot bracket (length approx 2 m) </br>
USB connection cable (length approx 2 m) </br>
Plug & cool tube in-and return (length approx 2 m) </br>
Coolant DP Ultra (1000 ml)</br></br>
Note: CPU Block not included!