Alphacool Repack - Single Laing D5 - Dual 5,25 Bay Station incl. 1x Alphacool VPP655 (15252)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Alphacool Repack - Single Laing D5 - Dual 5,25 Bay Station incl. 1x Alphacool VPP655 (15252)

Availability: In stock - Ships in 3-5 Business Days

Sku: 1012161


Quick Overview

Alphacool‘s high-class solution for integration of single D5 pumps into a cooling loop.


Alphacool‘s high-class solution for integration of single VPP and TPP pumps into a cooling loop.

Pump top and reservoir in one component offer many advantages: Easy mounting, compact dimensions and appealing looks! All this is combined and perfected in the new Alphacool Repack. But Alphacool would not be Alphacool if these new products would not feature innovations which were before not available in this configuration!

Alphacool Repack - Single Laing D5 - Dual 5,25 Bay Station is for designed installation in the front of an enclosure. For mounting two vacant 5.25” drive bays are required. 

Technological innovations featured in the Alphacool Repack:
So far the information about the reservoir sounds like a standard reservoir, but the developers have had many great ideas to solve common problems.

Anti Cyclon:
Different than standard solutions, where the coolant is guided around many edges and corners, still leaving micro-bubbles in the coolant, this reservoir uses a completely new technology. A new kind of filter is placed in front of both pump inlets, marked with “in” & “out”, eliminating the problem of micro bubbles at the core.

On standard Slot-In reservoirs filling was a hassle: Unscrew, pull out, fill, fixate again. And during filling a third and fourth hand would always come in very handy, as it is always a very difficult operation to fill in the coolant. Enough! The front is equipped with a filling straw which can be released with few turns, and as it is hollow it can be used for filling of the reservoir. For this we recommend the filling bottles or straws from our portfolio.

The looks:
The front, which is mainly what remains visible after mounting, is beautiful to look at: Plexi, Acetal, fill level indicator and filling straw in combination with the typical Alphacool copper look make a great appearance! The next step is the creation of lighting effects for the coolant. From the left and right side of the reservoir LEDs can be inserted, both 3mm and 5mm in site. The highlight: a 10cm long cold light cathode can be inserted from the top for maximum lighting performance! In combination with the LED it is even possible to implement different colors within the reservoir. Creative users will surely create even more effects with the Heatmaster and find new ideas.

Looking at all of these features, more power, great looks and comfortable handling, a simple question comes up: Why only high-class, this is already First Class!

Alphacool recommended for correct operation of the water cooling distilled water!

Note regarding cathodes:
We have measured that the cathodes have manufacturing tolerances of up to 0.3mm, even amongst the cathodes in the same package. As the fit of the cathodes is meant to hold them in place, it might be that due to the tolerances the cathodes will not fit at first. The small amount of excess material can easily be removed with a few brushes of sandpaper.

Important Note: Please note that the firm Alphacool International GmbH accepts no liability for damages of this product by using other coolants. We would like to point out that other coolants as inhibitors often contain alcohol or other corrosive substances attack the acetal, please only use Cape Kelvin Catcher or Innovatek Protect.

Alphacool's new power pump series, exceptional performance at an unbeatable price. The 12V pumps can simply be connected directly to the system PSU and the pump will start with your PC for maximum convenience and safety.

This pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed.

The ball motor design allows efficient operation of the pump in combination with excellent performance. The pump can simply be connected to a 12V Molex connector of the system PSU.

The special feature of this model is the fact that only the pump core itself is shipped. Why pay more for all the things you won't need when using this pump with a third-party pump top?  Another feature is the ability to be adjusted in five speed settings.

Technical specifications:
Dimensions (WxHxD): 65x65x57mm (without connectors)
Motor: Electronically commuted spherical motor
Rated voltage: 12V DC
Power consumption: 23W
Permitted voltage range: 8-24V DC
Pressure head at 12V: 3,7m
Maximum flow: 1500l/h
Pumped media: Water, water/glycol mixtures
Maximum system temperature: 60°C
Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
Special features: Adjustable in five steps
Step 1: 1800 rpm
Step 2: 2550 rpm
Step 3: 3300 rpm
Step 4: 4050 rpm
Step 5: 4800 rpm
Power connector:  4 Pin Molex

Additional Information

Manufacturer Alphacool
Overall Dimensions 125 x 148 x 84mm
Material Plexi
Color Clear
Reservoir Type Bay
Reservoir Size 2x 5.25"
Requires Pump Top No
Number of Ports 2x G1/4
Pump Included Yes
Pump Compatibility Laing D5
Included Alphacool Repack - Single Laing D5 - Dual 5,25 Bay Station incl. 1x Alphacool VPP655
mounting material
allen key

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

My Cart

You have no items in your shopping cart.