The Alphacool D-RAM water block is one of the few water blocks which uses the stock heatspreaders on RAM modules for mounting.
In typical Alphacool design, copper cooling plate and Plexi top, this RAM water block is designed to allow even beginners easy and quick mounting: Remove the old passive heatsinks, usually by removing three hexagonal socket screws and taking off the heatsinks. Then remove the old thermal compound and apply a new thermal interface (not included). The now cavant threads in the heatsink can now be used to mount the new water block with the old screws - done!
This water block is designed to cover up to 2 neighboring slots.
By design this water block allows ideal cooling performance even with low flow rates under 60l/h.
Note: Compatible with Corsair Dominator and Corsair Dominator GT RAM modules. The Corsair Dominator Platinum RAM modules are NOT compatible.
|Overall Dimensions||125.1 x 22.7 x 16mm|
|Compatibility||DDR2, DDR3, DDR4|
|Number of Ports||2x G1/4|
|Cooling Plate Material||Copper|
|Top Cover Material||Acrylic|
|Included||1x Alphacool D-RAM Cooler X2 Universal - Plexi|